Sectors We Serve
Industrial & Manufacturing Security
Plant perimeters, yard control, contractor screening and theft prevention — protection that keeps production running and losses off the balance sheet.
Downtime costs more than the theft did
On an industrial site the loss rarely stops at the stolen item. A cut fence stops a line. A contractor with unverified credentials becomes a safety finding. A missing tool becomes a shift of lost output. Security on these sites is measured in uptime and in incidents that never reached the production report.
We build the program around how the plant actually runs — shift changes, contractor traffic, scrap and waste movement, yard and dock activity — because those are the moments losses occur. Officers are briefed on your safety rules and work inside them, not alongside them.
What we deliver
Perimeter & Yard Control
Gate operations, vehicle and trailer inspection, and patrol of laydown yards and outdoor storage.
Contractor Screening
Credential verification, escort of unbadged personnel, and logged access to restricted areas.
Theft & Diversion Prevention
Scrap and waste movement monitoring, dock supervision, and documented loss investigation.
Shift Change Coverage
Presence at the highest-traffic moments of the day, when access control is under the most pressure.
Posts we staff
- Fixed guard posts
- Gatehouse operations
- Access control & screening
- Mobile & roving patrol
- Contractor escort
- Fire watch & standby
- Overnight & weekend cover
- Alarm response
- Strike & labor action
- Termination standby
- Emergency surge coverage
- Construction site security
What an industrial post actually covers
Post orders are written per site, and the site walk includes the safety orientation, not just the security one. We record what is true: where vehicles and pedestrians conflict, which gates are used by whom and when, how scrap actually leaves the property, where the muster points are, what the shutdown schedule looks like, and which parts of the plant an officer should never enter without an escort.
A typical deployment covers gatehouse and vehicle access control including driver, load and seal verification; employee and contractor entry at shift change; truck and trailer check-in and check-out against paperwork; yard and perimeter patrol on varied timings with fence-line inspection; dock and dumpster observation during the hours material moves; contractor and vendor sign-in, badging and escort; after-hours and shutdown access control; alarm response; and support to your emergency plan including gate control and muster-point assistance during drills and real events.
Seal and paperwork verification at the gate is the highest-value routine task on an industrial site and the one most often performed as a formality. Done properly — seal number read and recorded against the manifest, discrepancy escalated rather than noted — it closes the route most bulk loss actually takes.
Safety, compliance and the frame around the post
An officer on a manufacturing site works inside your safety programme, not alongside it. That means site-specific orientation before the first shift, the personal protective equipment your site requires, awareness of lockout-tagout and restricted zones, and clear instruction on what to do rather than what to attempt. OSHA‘s General Duty Clause and the site’s own programme govern; where your site is subject to Process Safety Management, contractor requirements apply to us as they do to any other contractor, and we expect to meet them rather than be waved through.
Where the operation is subject to C-TPAT or a customer’s supply-chain security requirements, the guard force generates a meaningful share of the evidence: gate logs, seal verification records, visitor and contractor control, and documented perimeter inspection. We write those records to be produced in a validation, not reconstructed for one.
In Arizona, guard services are licensed under A.R.S. Title 32, Chapter 26. Honeybadger holds Security Guard Agency licence 1759798 and Private Investigations Agency licence 1759795. Our officers are not peace officers. They deny access under your authority, document, and call law enforcement. They do not search employees or their vehicles except where your policy provides for it as a condition of entry and the process has been agreed in writing.
Shutdowns, turnarounds and construction phases
Every industrial site has periods when its normal controls are deliberately suspended: a turnaround, a major maintenance window, a capital project inside the fence. Contractor headcount multiplies, gates that are normally closed are open for equipment, and the people on site are unfamiliar with the property and with each other. That is when material loss and access failures concentrate.
Surge coverage for those windows is scoped in advance rather than negotiated during them — additional gate control, dedicated contractor processing, laydown-yard coverage for staged material and equipment, and after-hours site control for the duration. Planned early it is a line item; called late it is a premium.
Where the investigations and cyber side comes in
Sustained industrial loss is almost never solved by more patrol, because sustained loss usually has help on the inside. It is solved by finding the route. That is investigative work: covert surveillance on the movement rather than the perimeter, documented internal investigation, and financial investigation where scrap proceeds, vendor invoices or inventory adjustments are involved.
The other exposure is operational technology. Plant networks, historians and controllers sit under managed cyber services, and where a device, badge system or workstation is part of an incident, digital forensics preserves it properly. Background and vendor screening runs through the same agency, which matters most for the contractors who get the deepest access with the least scrutiny.
How a programme is priced
Industrial posts are quoted per post, per hour. The drivers are hours and shift structure, gatehouse versus roving, armed or unarmed, and the qualifications the site requires — a post needing full site safety orientation and specific personal protective equipment costs more than a lobby, and should. Coverage timed to shift change, delivery windows and the hours material actually moves outperforms blanket coverage at the same spend.
Included rather than billed separately: site survey and safety orientation, post orders, gate and seal verification procedure, supervision, patrol and incident reporting, uniform and standard equipment, licensing and insurance. Quoted separately: shutdown and turnaround surge, laydown-yard coverage, investigative and forensic work, and any site-specific certification or equipment.
Frequently asked questions
Can your officers search employee vehicles at the gate?
Only where your policy establishes search as a condition of entry, the workforce has been notified, and the process is agreed in writing beforehand. Our officers hold no independent search authority, and an improvised search creates a bigger problem than the theft it was meant to catch.
Are your officers trained for a plant environment?
Yes — site-specific orientation before the first shift, your required personal protective equipment, and clear instruction on restricted zones and lockout-tagout areas. An officer who does not understand the hazards is a hazard.
We keep losing scrap and material. Will more patrol fix it?
Usually not. Sustained bulk loss almost always leaves through a legitimate door with legitimate paperwork. Tighten seal and manifest verification at the gate first, then investigate the route. We will say that even though the investigation bills differently from the extra shift.
Can you cover a shutdown or turnaround?
Yes, and it is best scoped weeks ahead. Turnarounds are when contractor headcount peaks and normal controls are deliberately suspended, which is exactly when material goes missing. Planned early it is a line item; called late it is a premium.
Will your records support a C-TPAT or customer audit?
Gate logs, seal verification records, visitor and contractor control and perimeter inspection reports are written to be produced as they are. Tell us at scoping which programme you are validated under and the records are structured to it from day one.
How does heat affect coverage?
It shapes the whole patrol plan — timing, rotation, water and shade, vehicle and equipment specification, and officer safety protocols. Any Arizona industrial proposal that does not address summer conditions was written for somewhere else.
Programs are built, not assigned
Every sector carries its own risk profile, regulatory environment, and public-facing expectation. We build the post orders, training emphasis, reporting cadence, and escalation path around the environment — then supervise to it. Uniform standards are matched to the setting, from business dress to full tactical presentation.
Honeybadger is not currently licensed in every jurisdiction. Where a client requires coverage in a state we do not yet hold, we will pursue licensing for the engagement.
Scope your requirement
A short call establishes the site footprint, shift pattern, contractor volume, and the safety and regulatory requirements our officers must work inside. Certificates of insurance are typically returned the same business day.
Background reading: The threat picture at industrial and manufacturing sites
Labor actions
Coverage during a strike or labor dispute
A labor action changes the security job. The goal is to keep the site safe and operating, protect people crossing the line, and stay out of the dispute itself.
Neutral posture
Officers are briefed to stay professional and uninvolved. They do not debate, provoke, or take sides with picketers, replacement workers, or management.
Gate and vehicle safety
Controlled entry lanes, clear timing for deliveries and shift arrivals, and a plan for vehicles crossing a picket line without contact.
Documentation with care
Photographing or recording lawful picketing can raise labor-law concerns. What officers document, and how, is decided in advance with your labor counsel.
Law enforcement liaison
Local police are informed of the situation in advance. Officers call them for violence, blocked access, or property damage rather than acting themselves.
This is general information, not legal advice. Labor-dispute security should be planned alongside counsel.
Termination standby
How a termination standby runs on a plant floor
Separating an employee on an industrial site carries its own risks: access to tools and heavy equipment, familiarity with the plant layout, and coworkers nearby. A standby is designed to keep the process calm and dignified.
- Pre-brief. HR shares the timing, meeting location, and any known concerns. Officers confirm the exit route and where the employee’s vehicle is parked.
- Access timing. Badge and system access are disabled in coordination with the meeting, not hours before it, so the employee does not learn about the decision at a turnstile.
- Discreet presence. An officer stays nearby but out of the room unless HR asks otherwise, so the conversation does not feel like an arrest.
- Personal items and escort. Belongings are gathered according to your policy and the employee is escorted to the gate, with company property returned and logged.
- Follow-up. Gate staff are told the person no longer has access, and any statements of concern are documented for HR.
Where there are signs of a potential threat, a threat assessment for terminated employees should come before the meeting. It fits within a broader workplace violence prevention program.
Program review
What to review each quarter
A guard program should be reviewed based on what its records show, not on how busy the officers appear. These are the records worth reviewing with your site leadership.
- Seal and manifest exceptions at the gate, and what happened after each was escalated.
- Contractor badge exceptions: expired credentials, missing escorts, and people found outside approved areas.
- Fence-line findings and how long repairs took after they were reported.
- Alarm activations, response times as logged, and false alarms by zone.
- Safety observations officers reported, such as blocked exits or vehicle and pedestrian near-misses.
Patterns in these records show where coverage should shift. A periodic manufacturing plant security assessment takes the review further. To scope your site, request a consultation or call 602-725-2818.